Long Range

Long Range makes it possible to neutralize static electricity at a distance. This was previously impossible without the aid of fans or compressed air. With a range of 1000 mm, the system is well used in spaces where neutralisation of the static charge must be performed from longer distances or on larger surfaces.

Typical applications include injection moulding, extrusion, conveyor belts or retracting plastic film. In short, where materials and products often change size and shape.

  • Neutralizes static charge at distances up to 1000 mm with wide spread.
  • Integrated high voltage unit in the bar.
  • Powered with 24VDC.
  • 100% efficiency without loss.
  • Adjustable frequency for optimization of speed and range.
  • Up to 4 ionizing bars per control unit.
  • Certified in accordance with ISO9001:2015 and GS-TÜV.

Liros och NoStatic Long Range är certifierat enligt ISO9001-2015 och GS TUV.

Areas of Use

När plastfilmen lämnar extrudern skapas friktion mellan molekylerna och en statisk laddning som sedan byggs på av friktionen vid valsarna.

Wicketing machines. When the plastic film leaves the extruder and begins to cool down, friction is created between the molecules in the material. This generates a static charge which is then built on by the friction at the rolls. Long Range neutralises the charge up to 1 meter away with wide dispersion.

När man rullar av och upp syntetiska material får man stora problem med statisk elektricitet.

Rollers. When synthetic material is rolled off and on, severe problems with static electricity most often occur. In addition the growing roll may pose a problem as to placement of correctional equipment. Long Range, with a range of 1000 mm or more, can be mounted and used effectively without any additional mechanical constructions above the growing roll.

När ämnet blåses ut ur munstycket på maskinen och är kraftigt uppladdat så drar det sig till jordade maskindelar.

Jet Moulding. When the raw material is blown out of the nozzle of the machine, heavily charged, it reconnects to grounded machine parts. The semi-finished product is then in an incorrect position when the tool merges, with wastage as a result. A Long Range mounted a bit outside the tool neutralizes the charge quickly and efficiently.

Statisk elektricitet ger problem tomma PET-flaskor går på transportband för att lastas med robot till lastpall.

Automatic transport and loading of PET-bottles. Static electricity can be problematic when empty PET bottles are taken on conveyor belts for loading with robot to pallet. In this fully automatic handling, it is important that the bottles do not fall when placed on the pallet. Especially sensitive are the smaller bottles because their bottom area is so small. A Long Range mounted 500 mm above the conveyor belt neutralizes the cueue so that the robot can place the bottles on the pallet without them repelling or attracting each other.

Long Range extrusion principle 2
Long Range extrusion principle 1

When the plastic film leaves the extruder and begins to cool down, friction is created between the molecules in the material. This generates a static charge which is then built on by the friction at the rolls. Long Range neutralizes static electricity up to 1 meter away with wide dispersion. This eliminates a number of problems:

  • The high static charge is reduced. Long Range reaches both empty and full roll.
  • The material stops attracting particles from air and the environment.
  • The material does not risk creating disturbances in electronics.
  • Risks of personal injury are reduced. No involuntary movements from the operator due to electric shock.
NoStatic Long Range helps jet moulding machinery

When the moulded part comes out of the tool and begins to cool down, friction occurs between the molecules in the material and a static charge is generated. Long Range can neutralize this charge and thereby the adjacent problems.

  • The material stops attracting particles from the air and the environment. No contamination or wastage.
  • Risks of personal injury are reduced. No involuntary movements from the operator due to electric shock.
  • Moulded parts do not stick to tools or machine parts.
  • Neither do they bind to each other, they do not come apart or jump out of the collecting bin.

Range

NoStatic Long Range reaches 1000x600 mm.

Length

NoStatic Long Range dimensions
NoStatic Long Range gör det möjligt att neutralisera statisk elektricitet på avstånd upp till 1000 mm.
Certificates Symbols Liros and NoStatic Long Range centralenhet CCU-LR